Via Einstein, 23 Avigliana (TO)
Sliding doors for positive temperature industrial cold rooms
Food seasoning and processing at positive temperature
Sliding industrial cold room doors can only be used indoors on cold rooms that have a variety of uses, such as processing and curing food at positive temperatures; their functionality is especially appreciated in warehouses where fruit and vegetables need to be stored, or in storage warehouses and supermarkets.
“Lightweight’ sliding doors for industrial cold stores
Door for cold stores Model 976-977P
MIV has in its catalog the 976P-977P model that can operate at a temperature range of 0 to 4°C, the installation of which can be done either directly on the panel or on masonry.
The wing edge is made of aluminium, has a thickness of either 60 or 70 millimetres and is injected with ‘PUR’ type polyurethane foam that is completely CFC-free and has a density of 40/42 kg/mc
Sliding doors for small and medium-sized industrial cold rooms
For certain types of doors that have a great deal of movement, such as in cells that are used for storing fruit and vegetables, meat in slaughterhouses, storage warehouses and supermarkets, the sliding door model 900P is ideal due to its characteristics.
In fact, it has EPDM gasket that allows perimeter and bottom sealing, but most importantly, its leaf is supported by steel brackets and technopolymer pulley holders and slides on anodized aluminum track with corresponding track cover, and the bottom rail is made of anodized aluminum and is applied directly on panel; therefore, this sliding system is suitable for small and medium-sized entry lights that have a maximum size of 220 cm width and 330 cm height.
The same sliding door, with a 90 mm thick hinged edge, model 900M only differs in the maximum net width, which is 250 cm x 340 cm in height.
Sliding doors for large industrial cold stores
The industrial model 800MI is equipped with a lower leaf guide and floor register made of AISI 304 stainless steel; the heavy-duty sliding system is particularly suitable for large leaf sizes and use in difficult conditions. The stainless steel lever opening handle inside on the sash and outside on the aluminum edge is complete with heavy-duty covers and reinforcements.
Flat frame for industrial sliding door model 800MI
The 140 x 45 mm front-fixed aluminum flat frame is the thermal break profile that best provides structural strength and thermal resistance characteristics by obviating the thermal bridge and transmittance between the outside and inside cell.
Optional sheet metal, plasticized or stainless steel connection between frame and counter door.
For large compartments, in the area of sliding doors for positive-temperature cold rooms, the 890M model, which can be applied to either panel or masonry, has a leaf with a 90-mm edge, supported by brackets and pulleys of an increased size, Ø mm 92, made of technopolymer.
As with the industrial model, the “Heavy duty “sliding system is suitable for large sashes.
The pattern of the 890M is also taken up by the latest two models 979M and the 900P, both exclusively for indoor use.
PVC ‘L’ frame for sliding door
The characteristic feature of these two models is the 140 x 45 mm PVC “L” type hugging frame, with the possibility of integrating additional modules to compensate and embrace the thickness of the panel or masonry, up to close with the standard PVC or on request aluminum counter door.
Opening is enabled by the levers, which vary in length depending on the size of the leaf, made of aluminum or, upon request, stainless steel.
Contact information for cold store doors.
For further information write to us in our modulo contatti.
Whatsapp contact: https://api.whatsapp.com/message/BWKLO7GYVGFDK1
Link Facebook: https://www.facebook.com/mivrefrigeration
Link Linkedin: linkedin.com/company/mivinsulatingsystems